Choose from premium quality Pressure Systems
designed to supply water to the Australian house. These systems
have been designed and manufactured by a world leader in Pressure
Systems.
Two alternative systems are available for
you to choose. The first is the conventional pump with a pressure
tank and
pressure
switch. Inside the pressure tank is a water bladder and this
fills up under pressure when the pump starts. The pressure
switch stops the pump when the pressure in the bladder reaches
a high set pressure. When you open your house tap, the bladder
will empty until the pressure reduces to the pressure switch
low set point. The pump will then cut in and pump the water
to your house. The benefit of this type of system is that
you receive a certain amount of draw-off on the pressure tank
before
the pump starts. The larger the pressure tank the more the
draw-off. This allows the toilet to fill or a glass of water
to be poured without starting the pump. These systems have
been used for over 50 years and have proven to be reliable
and easy to maintain.
The second system is that using a Hydrotronic
Electronic Switch. This switch has revolutionised pressure
systems and has made
them more user friendly and simpler to use. The switch is
connected to the discharge of the pump and operates with an
electronic
circuit board to sense the pressure and flow in the system,
It will start the pump when you open your house tap and it
will stop the pump when the tap is closed. The benefit of
this system is that you will have the constant pressure while
you’re
using the tap. This is great when you’re in the shower
for you will have constant pressure. No pressure fluctuations
and no water temperature changes. The Hydrotronic also provides
for loss of prime protection. This means that the pump will
not overheat when you run out of tank water. The pump will
shut down automatically.
Model
Tank Size
Draw Off
Flow Rate
Blueline 120
24L
10L
55L/Min
Inox 230
60L
24L
65L/Min
Inox 230
100L
40L
65L/Min
Inox 230 H
Hydrotonic
Nil
65L/Min
Blueline 240
24L
10L
80L/Min
Inox 240
60L
24L
80L/Min
Inox 240
100L
40L
80L/Min
Inox 250
60L
24L
90L/Min
Inox 250
100L
40L
90L/Min
Inox 240 H
Hydrotonic
Nil
80L/Min
Inox 250 H
Hydrotonic
Nil
90L/Min
Medium House Pressure Systems
For medium size houses the Blueline 120,
with a 24 litre tank, is the quality choice. The tough reinforced
plastic design ensures long life and excellent performance.
If you require a larger pressure tank, the Inox 230 with 60
litre or 100 litre tank is the quality alternative. The Inox
range are multistage pumps with a stainless steel pump housing
and reinforced plastic end housings. The Inox 230 can be used
with a Hydrotronic Constant Pressure Switch with excellent
performance.
Large House Pressure Systems
For the large house, the Blueline 240, complete with a 24
litre tank, is the best alternative. This pump has the same
stainless steel design as the Inox range put together with
a quality tank. ClayTech also offer the Inox 240 and Inox
250 with a 60 litre or 100 litre tank. Alternatively one
can choose to use the Hydrotronic Constant Pressure Switch
with either the Inox 240 or Inox 250.